DIN Rail Adapter for Fibaro Module FGS-223 - Eutonomy

The euFIX S223 adapter is used to install the Fibaro® Switch FGS-223 module on a DIN TH35 type rail in the electrical panel.

The euFIX S223 adapter consists of a housing and an electronic board, on which the Switch FGS-223 module is mounted. The housing dimensions are suitable for a standard DIN rail.

The electronic board contains a set of screw terminals, where all wires (power, input and output signals, control buttons) can be connected securely.

Functions:

• DIN adapter for Fibaro Switch FGS-223 without/with pushbuttons
• Used to install Fibaro Switch FGS-223 on DIN rail type in the electrical pane
• Free location on the label to locate the line checked

Technical Characteristics:

• Supply voltage: 230 V AC +/- 10%, 50-60Hz
• Load power: max 6.5A per channel, 10A total
• Dimensions: 34.8 x 87.3 x 64.7 mm
• Width in TE units: 2 TE modules
• Wire conductor section: max. 2.5 mm2
• Maximum length of wires connected to inputs Sx, S1, S2: 20m
• Operating temperature: 0 ° C to +50 ° C Relative humidity: ≤90%, no condensation

Regulation:

• LVD 2014/35 / CE
• RoHS 2011/65 / EU

Manual:

​

Spune-ţi opinia

Introduceţi codul din imagine: